Sunday, November 27, 2011

Hallicrafters S-53A Update

Got to spend a little time today working on the S-53A.  Still needed a 5Y3GT rectifier tube so I got the suggestion from Ralph-W4REQ to check with Pete-K4JAC.  I emailed Pete and sure enough he had an old 5Y3 in his stash and told me to come on over and pick it up.  So on the way to church tonight I stopped by Petes and got the tube as well as some diodes and a tube base in case I want to build a solid state rectifier instead.  Pete also drew up some nice diagrams for me to follow if I go that route.  What a swell guy.  Pete needs some help lowering one of his vertical antennas so he can do some work on it so I told him I'd come by sometime and give him a hand.  Seems like a fair trade.  That's what I love about ham radio! 

After church I went ahead and took the case off the radio so that I could clean out the glass from the old broken tube.  Also found the washers and nuts that are supposed to hold the transformer to the main assembly.  These nuts had evidently come off at some point and allowed the transformer to come loose and hit up against the rectifier tube thereby shattering it.  Got it secured now.  Gonna do a thorough cleaning on the inside while I have everything apart.  Also need to replace a toggle switch that controls "Standby/Recieve".  I'll start searching for one of those next.  The dial face is also bent inward and is causing the tuning for the Bandspread and Frequency to be obstructed.  Still trying to figure out what I need to do about that. 

That's it for tonight.  I'll work on it some more this week.


View of the back with the case off

Serial Number

Underside Circuitry

Some of the broken tube glass that was floating around inside


Replacement 5Y3 Rectifier Tube that I got from Pete-K4JAC

Replacement 5Y3 Tube that I got from Pete-K4JAC.  Note the diagrams that Pete drew up for me.

Broken glass inside the radio

Speaker

Closeup of some of the components

1 comment:

Anonymous said...

I'm looking at doing the same with replacing the 5Y3 with a pair of diodes. In your picture, there's a hand drawn schematic in the background: it appears the diodes are pointing the wrong way